SOLID.COOLING

Extend your net production time

SOLID.COOLING is an innovative calibration technology from the Exelliq Group. As an optional feature, SOLID.COOLING can be integrated into the RED.TOOLING system to further enhance its performance through highest thermal conductivity which improves the cooling effect.
 

How does SOLID.COOLING work?

Cooling holes with small cross-sections have been intentionally left out of designated calibrator sections. Contamination or cooling duct blockages are now a thing of the past. Cleaning and maintenance expenditures are reduced. The system is significantly less susceptible to contamination in the water circuit and to variations in water pressure and water temperature. SOLID.COOLING further increases process reliability and at the same time decreases the manual monitoring efforts during production.

Benefits

  • Prolonged net production time
  • Reduced cleaning and maintenance expenditures
  • Less sensitive to water pressure and temperature fluctuations
  • Limited need for monitoring
  • Increased process reliability
  • Lower production and profile costs

Example

If the total number of rejects is reduced by 2% 
Cooling systems not blocked and quicker start-up process
€28,000
Saving of 25 cleaning cycles for small cooling cross sections€12,500
Total savings per 1,000,000 running metres 

€40,500

Given:
Main tooling 4 m/min Profile costs €1.4/m
Profile weight 1.2 kg/m 1,000,000 running metres

ContactContact persons