- Particularly economical extrusion line
- Priority placed on the basic requirements of profile extrusion
- Greiner’s tried-and-true technology put to use
- Designed for the most diverse types of profiles
MPT.TOOLING is the result of decades of experience and incorporates the know-how of thousands of high-performance extrusion toolings built by Greiner Extrusion. The design is lean and trimmed to the basics; however, the core elements of Greiner’s high end tooling technology are still included.
The unpretentiousness and simplicity of RED.CAL basic fulfils the basic requirements of profile extrusion. The built-in operating panel provides an overview of the current settings at any given time and modifications can be easily made at the push of a button. There is the option to mount the panel to a swivel boom. The further developed cyclone unit ensures higher vacuum stability in the tanks, and the improved positioning of the water discharge pump ensures that the extracted water is safely returned to the water circuit. The upstream dirt particle filter protects the water discharge pump from contamination or even failure. A filter unit with a bypass function is available as an option and cleans the process water continuously.
The high speed range and the simultaneously large haul-off force make the RED.PUL basic a generalist in profile extrusion. Whether small profiles have to be withdrawn individually or several times at high speed, or whether it’s large profiles requiring a lot of power – the RED.PUL basic can grab a hold of it. Thanks to the even distribution of the contact pressure, it is gentle on the profile nonetheless, leaving no marks – even on delicate profiles.
Equipped with a powerful motor and a carbide saw blade, the RED.CUT basic cuts any profile – even material combinations. The adjustable profile guides positioned on the infeed and outfeed side ensure an angular cut. The optimised chip channel in combination with a powerful extractor fan makes for clean profile cutting. And if you want to do without chips altogether and the profiles allow for it, the chipless cutting device RED.CUT C/235-RC is optional. This means that not only the chips but the noise, too, will vanish from your production.